Efficiency and capacity go hand in hand. Increase your practice’s efficiency when you increase your instrument processing capacity. Features include:
• Preprogrammed cycles can improve convenience and flexibility, and increase confidence for every cycle
• Programmable controls allow you to change exposure time, temperature, dry time and vent, and store your changes if desired
• Intuitive display and simple prompts for easy operation
• Patented, automatic-open door drying to promote faster, more efficient drying of instruments
• Steam-Flush Pressure Pulse Air Removal System designed to ensure proper steam penetration
• LCD display alerts operator if door is not closed completely or reservoir water level is low
• Reservoir fill port and drain tube located in the front of the unit for ease of draining and filling
Model/Order No. M11
Overall length w/plug 23.8" (60.5 cm)
Overall width 17.8" (45.2 cm)
Overall height w/printer 17.8" (45.2 cm)
Minimum countertop area 21" (53.3 cm) D x 17.8" (45.2 cm) W
Chamber 11" diameter (28 cm), 18" depth (45.7 cm) 6.5 gal usable volume (24.6 liters)
Trays Two large – 9" W x 15" L x 1.1" D, (22.9 cm x 38 cm x 2.9 cm), Two small – 6.6" W x 15" L x 1.1" D, (16.8 cm x 38 cm x 2.9 cm)
Unit weight 99 lb (44.9 kg)
Shipping weight 131 lb (59.4 kg)
Water reservoir capacity 1.4 gal (5.3 liters)
Electrical Requirements:
• 115 VAC, 50/60 Hz, 15 A Single Phase
• 115 VAC has 1425 W tubular immersion heater
• 230 VAC, 50/60 Hz, 10 A Single Phase 230 VAC has 1500 W tubular immersion heater
Safety Standards:
• UL Listed to U.S. & Canadian Standards
• UL 61010-1, 2nd Edition
• IEC 61010-2-040, 1st Edition
• CAN/CSA C22.2 No. 61010-1, 2nd Edition
• CSA C22.2 No. 61010-2-040-07, Part 2-040, 1st Edition
• Meets the requirements of ASME Boiler and Pressure Vessel Code
• A separate (dedicated) circuit is recommended for this sterilizer