Midmark VistaCool™ Direct-To-Drain System

Midmark VistaCool™ Direct-To-Drain System - Distributed by Henry Schein
Midmark VistaCool™ Direct-To-Drain System - Distributed by Henry Schein

Schedule a Demo

Request a Quote

The steam and condensation produced by your sterilizer can be time-consuming and messy to empty from condensate tanks. It can even melt plumbing if not cooled sufficiently before pouring down the drain.

Financing Opportunities

  • Finance Calculator

    Click to Request Product Financing Options

The steam and condensation produced by your sterilizer can be time-consuming and messy to empty from condensate tanks. It can even melt plumbing if not cooled sufficiently before pouring down the drain. 

Finally, a product designed to provide a reliable and efficient solution. The VistaCool direct-to-drain system is designed to reduce the temperature of sterilizer wastewater – eliminating condensate bottles and tanks! Also, using VistaCool with larger chamber sterilizers can reduce maintenance by allowing you to use fresh water with every cycle.

There are two models available: a single unit, designed to be compatible with the Midmark M3 and a double unit, designed to be compatible with any two current Midmark automatic sterilizers (Midmark M3, M9 and M11). VistaCool is designed to: 

  • Protect staff by eliminating hazardous handling of hot condensate tanks
  • Reduce sterilizer maintenance – saving time and effort
  • Prevent autoclave wastewater from melting plumbing
  • Protect drains with built-in backflow prevention (meets or exceeds local plumbing codes)
  • Help prevent mold and mildew caused by spills and exhaust from condensate tanks
  • Help protect cabinets from rot and rust by sending cooled wastewater directly and safely to the drain


Manufactured by Vista Research Group, Ashland, OH, for distribution by Midmark Corporation. VistaCool is a trademark of Vista Research Group, Ashland, OH

Single Unit
Tank material: Polyethylene – Natural White
Tank dimensions w/fittings: 7.6" W x 7.6" L x 13.75" H (19.3 cm x 19.3 cm x 34.9 cm)
Tank volume: 1.50 gal (5.70 liters)
Tank weight w/water & fittings: 15.0 lb (6.8 kg)
Approximate shipping weight: 7.0 lb (3.2 kg)
Coolant water connection: Supply fitting for ¼" O.D. required. To be provided by installer.
Max coolant water pressure: 100 psi (6.9 bar)
Max altitude (If using air gap): 6,561 ft (2,000 m)

Designed for the M3 UltraFast.

Double Unit
Tank material: Polyethylene – Natural White
Tank dimensions w/fittings: 4.0" W x 13.0" L x 17.0" H (10.2 cm x 33.1 cm x 43.2 cm)
Tank volume: 3.00 gal (11.40 liters)
Tank weight w/water & fittings: 28.0 lb (12.7 kg)
Approximate shipping weight: 10.0 lb (4.5 kg)
Coolant water connection: Supply fitting for ¼" O.D. required. To be provided by installer.
Max coolant water pressure: 100 psi (6.9 bar)
Max altitude (If using air gap): 6,561 ft (2,000 m)

Designed for use with any combination of Midmark sterilizers.

Manufactured by Vista Research Group, Ashland, OH, for distribution by Midmark Corporation. VistaCool is a trademark of Vista Research Group, Ashland, OH